Jbl-synthesis SDP-25 User Manual download pdf (Page 10)

JBL SYNTHESIS SDP-25

GENERAL SETUP

Before making initial setup adjustments you may wish to change some of the system settings

that will make it easier to configure your SDP-25. To do that, press the OSD button to call up the

Main Menu and then press the Down Navigation Button until General Setup is highlighted. Then,

press Enter to move to that menu.

General Setup

Language English

Front Brightness 75%

Volume Units dB

Volume Default On

Volume Level -25dB

Units of Measure Inch

RS232 Control Off

CEC Control Off

Menu Appearance

Transparency Mid

Status Message 3 Seconds

Menus 1 Minute

Global Lip Sync 0ms

Auto Power Down On

FW Version VX.xx/X.xx

Factory Settings

To change any of these settings, use the Up/Down Navigation buttons to highlight the desired

setting and press Enter. Then, use the Up/Down Navigation buttons to change the setting. Press

Enter when done to return to the General Setup Menu.

Language: This setting lets you change the language of the on-screen menus and front-panel

display messages from the default setting of English to French, Spanish, Dutch, German or

Italian.

Front Panel Brightness: In some room environments you may wish to dim the front panel

brightness. You may choose a brightness of 25%, 50% or 100% (full brightness) instead of the

default setting of 75% with the display brightness changing as you toggle through the options to

show the new setting’s impact.

Volume Units: The default setting for the volume display is in 0.5dB increments from -90dB

to +10.0dB, with 00.0dB being the nominal reference level. Change the setting to “Numeric” to

display the relative volume level on a scale of “0 to 100”.

Volume Default: The default setting of On always sets the volume to the same preset level

when the SDP is turned on. If you prefer to have the last-used volume setting be applied each

time the unit is turned on, change the setting to “Off”. Note that “Volume Level” will then be

grayed out as that option will no longer applicable.

• Volume Level: When the setting for Volume Default is set to On, if you want to set the turn-

on volume level to something other than the default of -25dB (dB) or 65 (Numeric) you may

do that here.

Unit of Measure: To show the Distance settings in the Speaker Distance Menu (See page 13) in

centimeters rather than inches, change the setting here to “Metric”.

RS232 Control: If you are using an optional external control system change this setting to “On”.

We recommend that this setting should be used by a custom installer and it should not generally

be changed.

CEC Control: When the SDP-25 is connected to video displays that have CEC (Consumer

Electronics Control) capability on their HDMI connections, change this setting to “On” to enable

single-button control of power On/Off. When CEC is turned on at both the video display and the

SDP-25 turning either product on will also send a Power On command to the other product.

IMPORTANT NOTES:

• CEC functionality will vary depending on the capabilities of your video display. For CEC

to function, make certain that it is turned on for both the SDP-25 and your video display.

Consult the video display’s Owner’s Manual for compatibility information.

• If you are using the HDMI Audio Return Channel to send digital audio from your TV to the

SDP for streaming services the CEC Control setting MUST be set to On.

Menu Appearance: The three sub-settings for Menu Appearance control the way the On-

Screen Status Messages and Menus appear.

• Transparency: This setting lets you change the appearance of the box surrounding the

Menus and Status Messages. To have a black box surrounding the messages, change the

setting to “Low”. To have these displays appear against a very light background, select

“High”. It is recommended that you keep the default setting of “Mid”, which allows you to

see the menus while enabling the program material to be seen behind it, while still keeping a

slight black tint behind the menus so that they are visible when the content is very light.

• Status Message: This setting sets the amount of time the status messages that pop up

on volume, input or mode change appear in the lower right corner of your display. You

may select an on-screen time between 1 and 30 seconds. To stop these messages from

appearing choose “Off”.

• Menus: This setting sets the amount of time the OSD Menus remain on the screen from

between 1 and 10 minutes.

General Setup

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Jbl-synthesis SDP-25 User Manual Page 10

Comments to this Manuals

Related products and manuals for Acoustics Jbl-synthesis SDP-25