Jbl-synthesis SDP-25 User Manual download pdf (Page 19)

SPECIFICATIONS

MAIN ZONE AUDIO

Frequency Response: 20 Hz – 20 kHz, ±0.25dB

Analog Input Impedance: 47K ohms

Input Level: 4 Vrms in DSP modes

4 Vrms in 2Ch Bypass Mode

Output Impedance: 480 Ohms

Digital Coax Signal Strength: 0.5V p-p

Output Level: 4 Vrms

Signal-to-Noise Ratio: 90dB in DSP Modes

98dB in 2ch Bypass Mode

THD + Noise: <0.007% in DSP Modes

<0.015% Analog in - Bypass & DSP Modes

1 kHz at 1.0VRMS

Bass Management:

High-Pass Filter:

Low-Pass Filter:

2nd order (x7)

4th Order, 40 - 200Hz Crossover Freq.

Audio Resolution: Up to 7.1 Channels at 192kHZ/24-bit

Supported Audio Formats: Dolby TrueHD, DTS-HD Master Audio, DVD Audio

Crosstalk: <72dB

A/D Conversion: 24-Bits, up to 192 KHz, Delta-Sigma

114dB DR, -100dB THD+N

D/A Conversion: 24-Bits, up to 192 KHz, Delta-Sigma

114dB DR, -100dB THD+N

DSP Engine: Dual TI TMS320D

Low Frequency Cutoff: < 10Hz (All speaker channels in Bypass Mode)

High Frequency Cutoff: >200Hz (All speakers in Bypass mode, -3dB point)

VIDEO INPUT & OUTPUT CONNECTIONS:

HDMI Inputs: 6 HDMI Type A (19 pin) connectors

HDMI Outputs: 1x HDMI Type A (19 pin) connection with

Audio Return Channel

1x HDMI Type A (19 pin) connection for Main/2nd Zone

HDMI Features: 12-bit Deep Color (1080p)

3D Pass-through

xvYCC (x.v. Color)

Video bandwidth up to 300 MHz

4K support to 2160, 50p/60p, 8-bit, 4:2:0

Composite (CVBS) Video Inputs: 2x @ 1.0V p-p, 75 ohms

Composite (CVBS) Video Outputs: 1x 1.0Vp-p, 75 ohms

Component Video Inputs:

Cb/Cr, Pb/Pr:

0.75Vp-p, 75 ohms

1V p-p, 75 ohms

AUDIO INPUT & OUTPUT CONNECTIONS:

Analog Audio Inputs: 5x stereo single-ended/unbalanced L/R pairs

1 set 7.1 single-ended/unbalanced (L/C/R/LS/RS/LBS/

RBS/Sub)

1x 3.5mm stereo (Front Panel)

Analog Audio Outputs: 2x stereo single-ended/unbalanced L/R pairs

1 set 7.2 single-ended/unbalanced (L/C/R/LS/RS/LBS/

RBS/Sub 1/Sub2)

Digital Audio Inputs: 6x via HDMI

5x Coaxial (RCA) 75 ohms (S/P-DIF)

5x Optical Toslink (S/P-DIF)

1x USB 2.0 Type B

DATA AND CONTROL CONNECTIONS:

Trigger Outputs: 2x 12 VDC, 300mA, Trigger B programmable

USB: 1x USB Type A for software updates only

Data Connection: RS-232 via DB-9 connector for Control and System

Feedback

IR Inputs: Front Panel IR sensor, switch selectable for on/off

1x IR in, 1x Flasher In, 3.5mm jacks

IR Outputs: 3x, 3.5mm jacks

ELECTRICAL & PHYSICAL SPECIFICATIONS:

Mains Voltage: 120 VAC or 230 VAC [factory-set]

Power Consumption: Standby: < 0.5 watts

Maximum Power: 20 watts

Unit Dimensions [H x W x D] 6" x 19" x 16.3" / 153 x 483 x 414 mm

Shipping Dimensions: [H x W x D] 11.4x 20.6" x 24.2" / 288mm x 522mm x 613mm

Unit Weight: 19.5 lb/8.86 kg

Shipping Weight: 26.5 lb/12 kg

Specications

1 2 ... 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Jbl-synthesis SDP-25 User Manual Page 19

Comments to this Manuals

Related products and manuals for Acoustics Jbl-synthesis SDP-25